Anemostat STORM-PRO-HR Hurricane-Rated Vision Lite Kit with 1/2″ Thick Laminated Hurricane Glass

Anemostat/NGP STORM-PRO™-HR Low-Profile Hurricane Rated Lite Kit

The StormPro-HR™ is easy to install and provides a low profile, flush-to-the-door look. Uses 1-3/4″ sheet metal screws that pass through the door cutout, and fasten to the opposite side of the vision frame. HRT-090 glazing tape is supplied and installed on both sides of the glass.

• Order size equal to cutout size – Glass size is 1″ under, Visible glass is 2″ under
• For 1-3/4″ Doors
• 18 Ga. Galvanneal A40 Steel
• Mitered and Welded Corners
• Countersunk Mounting Screw-Holes
• #8 X 1-3/4″ Phillips Head SMS
• Gray Primer (GPZ) Powder Coat Finish
• 1/2″ Laminated Glass: 2 pcs. 3/16″ Clear Glass with Clear Bonded Laminate Center
• 5/8″ x .090″ Acrylic Conformable Foam Glazing Tape (Both Sides)
• Windstorm Rated
• Light Kit for Use in Windstorm-rated Assembly in accordance with ANSI/ASTM E330, ANSI/ASTM E1886, ASTM E1996, AAMA/WDMA/CSA 101/I.S.2/A440, FEMA 320, FEMA 361 and ICC 500. Design Pressure = +/- 70 PSF, Large Missile, Impact = 350 ft. lbs., Hazard – Hurricane
• Complies with Florida Building Code Standards
• This Product is not Rated for Use on Fire-Rated Doors
• Designed for Use on Doors Manufactured Within Door Industry Tolerance of +/- 1/16″