Ceco Commercial Hollow Metal Doors & Frames
CECO Door is one of the world’s leading manufacturers of steel doors and frames for commercial, industrial and institutional buildings. Doors are available in a number of gauges and honeycomb, polystyrene foam and steel stiffened cores. CECO products are SDI Certified and Made in the USA. Trudoor is an authorized WHI fire-labeled shop, enabling us to modify, re-certify and label Ceco fire-rated doors and frames.
- Ideal for Interior and Exterior Applications
- Impact Resistant Honeycomb Core Doors
- Frames Designed for Quick Installation
*specify “Ceco Brand” and series in notes of Quote Builder form
CONFIGURE & GET PRICEWhere the versatility of a non-handed door is an important advantage, the Omega offers a honeycomb core construction which can be switched on the job site to right or left handed openings, swing in or out, or as double doors.
- 1-3/4″ thick full flush (seamless optional) styles
- Available in 18 and 16-gauge steel face sheets – Galvanized steel also available
- “STC” (sound transmission class): 32
- Impact resistant, full honeycomb core is sanded-edge
- Crush strength is 45 PSI. Hemmed, smooth finish edges
- Seamless edges available
- Inside coated with waterproof adhesive for secure bond and rust prevention
- Hinge reinforcement 7 gauge steel (3/16″ plate)
- Chemically treated for paint adhesion. Oven-dried baked-on factor primer
- Patented mechanical interlock eliminates weld marks, adds rigidity
- Inverted top and bottom end channels welded to both face sheets for added stiffness. Optional steel closing caps available
- Made in USA
Regent combines the aesthetic advantage of a beveled lock edge with the rigidity and impact resistance of Ceco honeycomb core construction. Regent’s lock edge is beveled 1/8″ in 2″ to produce a tight closure clearance. Face sheets are supported by full honeycomb core to assure exceptionally flat surfaces with high structural resistance to impact damage. Regent accepts cylindrical, mortise and unit locks and is adaptable to other commercial hardware.
- 1-3/4″ thick full flush (seamless optional) styles
- Available in 18 and 16-gauge steel face sheets
- Galvanized steel also available
- “STC” (sound transmission class): 32
- Impact resistant, full honeycomb core is sanded-edge. Crush strength is 45 PSI
- Hemmed, smooth finish edges
- Seamless edges available
- Inside coated with waterproof adhesive for secure bond and rust prevention
- Hinge reinforcement 7 gage steel (3/16″ plate)
- Chemically treated for paint adhesion. Oven-dried baked-on factory primer
- Patented mechanical interlock eliminates weld marks, adds rigidity
- Inverted top and bottom end channels welded to both face sheets for added stiffness. Optional steel closing caps available
- Made in USA
Door Construction
- 18 gauge face sheets
- Polystyrene Core
- Galvanealed face sheets
- Mechanically interlocked edge seams
- 16 gauge inverted top and bottom channels
- Top flush closure cap
- 10 gauge hinge reinforcements
- Non-handed, furnished with hinge closing plates
- 16 gauge closer reinforcement
- 1-1/2 Hour Warnock Hersey fire label
- Made in the USA
Standard Frames with Unequal Rabbets for Masonry, Wood or Metal Stud Walls. Series SU frames have precision die-cut corners with positive locking tabs to assure rigid assembly connections.
- For masonry, wood or metal studs wall, installed either to cap or butt the wall. Three or four piece door frames, Borrowed Lites, Side Lites, or Transom Frames.
- Frame jamb depths: 4-3/4″, 5-3/4″, 6-3/4″, 7-3/4″, 8-3/4″
- Unequal rabbets
- 16 and 14-gauge steel (14-gauge optional)
- Available Knock-Down or Set-up and Welded.
- High recycled steel content for LEED points up to 58.8%
- Fire-rated up to 3 Hours
Ceco DU and Series Drywall Frames have been design engineered to be installed on standard or non-standard wall sizes over prefinished or unfinished drywall board.
- Heavy Duty; 16-Gauge Cold Rolled Steel
- Quick Installation
- Standard Compression Anchors for Steel or Wood Stud Walls
- Die-mitered corners
- Universal Hinge Preparations
- Optional Door Closer Reinforcement
- Fire-Rated up to 90 Minutes
- Frame construction meets the requirements of ANSI A250.8-2003(SDI 100)
6’8″ Doors
7’0″ Doors
8’0″ Doors
Popular Metal Doors
-
Flush Commercial Hollow Metal Doors
Starting at: $345 -
Hollow Metal Door with Lite Kit & Glass
Starting at: $480 -
Hollow Metal Door with Louver
Starting at: $470 -
Double Doors - Hollow Metal Pairs
Starting at: $780 -
6-Panel Embossed Hollow Metal Door
Starting at: $450 -
Metal Building Doors
Starting at: $975* -
Fire-Rated Metal Door
Starting at: $350