Cendrex PFN-00 Fire-Rated Uninsulated Access Door with Exposed Flange, Ring/Tool Key-Operated Slam Latch, Piano Hinge

Cendrex PFN-00 Fire-Rated Uninsulated Access Door with Exposed Flange, Self-Latching Ring/Tool Key-Operated Slam Latch, Piano Hinge

The fire-rated uninsulated access door can be used on fire-rated walls.

• Material: 16 gauge cold rolled steel
• Hinge: Continuous piano hinge
• Locking mechanism: Self-latching tool-key operated slam latch and ring-operated slam latch, both included
• Flange: 1″ exposed flange
• Frame: 2-1/2″ in depth, made of cold rolled steel
• Inside panel release: Mechanisms to allow panels to open from inside, standard on all doors over 12″ X 12 inches.
• Rough opening: Door sizes + ¼ ” or + 6mm
• Finish: High quality white powder coat primer
• Packaging: Individually wrapped, 1 door per box

Fire-rated access doors, for vertical use, are subject to the following:

Vertical wall assembliesFire rated access doors, for vertical use, are subject to the following:

• Certification: UL 10B (2009), NFPA 252 (2012), CAN/ULC S104 (R1985), CAN/ULC S104 (2010)
• Rating Achieved: 1-½ hours, neutral/negative pressure
• Maximum size: 36″ x 36″ (914 mm x 914 mm), maximum area of 1296 in², tolerance on height and width limitation is more or less 3″ (76mm) as long as the area does not exceed 1296 in².
• Temperature rise: No rating achieved