Design Hardware E-LE-08 Electrified Escutcheon Lever Trim with Mortise Cylinder

Design Hardware E-LE Electrified Escutcheon Lever Trim, Includes Mortise Cylinder

E-LE exit device trims for the 1000 series are perfect for stairwell conditions or applications where electric pull-back of the exit device’s latch bolt is cost prohibitive or not required. This is especially practical in applications where fire/life safety codes require a “fail safe” condition which is not an option with electrified latch pullback devices. Because the current draw is quite low there is no need for a more expensive power supply to provide the surge current

Designed to work with all 1000 series exit devices – Motor-Controlled Locking/Unlocking

• Perfect for stairwell applications where electric pullback of the exit device’s latch bolt is cost prohibitive or not required
• Ideal for applications where fire/life safety codes require a “fail safe” condition
• Low current draw means there is no need for a more expensive power supply
• Operating Voltage: 12 or 24VAC/DC (+ or- 10%)
• Amperage: 250mA MAX Inrush, 10mA MAX Holding
• Coil Resistance: 12V = 49 ohms/ 24V = 15 9 ohms
• Steel, Zinc Dichromated Chassis – Stainless Steel Exterior Housing
• Thru bolts to head of exit device
• 5″ Solid Stainless Steel lever – 2-7/8″ total projection
• Escutcheon: 3″ Wide x 9″ Height x 3/4″ Projection – Will cover 161 door prep
• Door Thickness: 1-3/4″ standard
• Fasteners: Includes thru bolt posts and 1/4″-20 machine screws for installation
• Cylinder: 1-1/8″ Mortise cylinder with std. cam (included) – 6 Pin Brass, C Kwy, with 2 Keys