Hager Roton 1200-650XHD Extra Heavy Duty Concealed Leaf Continuous Gear Hinge, For Doors 2-3/8″ or Thicker

Hager Roton 1200-650XHD Full Mortise Continuous Geared Hinge, Extra Heavy Duty, For Doors 2-3/8” or Thicker

The Original – Hager Companies has been manufacturing the original Continuous Geared Aluminum Hinges for over 25 years. The unique design of Roton® consists of three important parts: an internal rolling contact gear profile, a high-strength cover channel, and solid bearings made of celanex. Working together, these parts evenly distribute door weight and maintain door alignment for superior performance.

• Strong enough to swing doors heavier than 600 lbs., wider than 4 feet, and taller than 10 feet.
• Extra heavy duty for heavy, high frequency doors or extremely heavy, low frequency doors
• For doors 2-3/8″ or thicker
• 15/32″ (12 mm) clearance hinge side plus standard lockside clearance
• Frame leaf alignment rib for proper hinge and door location
• 780 Series Roton® continuous geared hinges meet requirements for positive pressure UL10C, UL10B and UBC7-2 Part 1
• Available lengths: 83″ (for 7’0″ doors), *95″ (for 8’0″ doors), and *119″ (for 10’0″ doors)

*excessive length shipping fee applies

Field Modifications
While Roton® hinges can be cut in the field, any product modifications may void all warranties. Should in the field modifications be required, cut only from the bottom of the hinge. Do not cut through bearings or screw holes.