Product Overview
Concealed edge mount architectural grade aluminum hinges. No mortise required. For new construction or renovation/retrofit. Hinge failure is the most common cause of entrance failure. The revolutionary SELECT geared continuous hinge puts an end to costly and frustrating hinge failure problems.
Frame leaf covers butt hinge preps. Flush mounted (no door inset). For 1-3/4″ doors.
SL40 HD600 geared continuous hinges are BHMA Grade 1 certified.
- Lifetime lubrication
- Anodized after machining
- Consistent templating
Brand | |
---|---|
Finishes | Clear Anodized Aluminum, Dark Bronze Anodized Aluminum |
Length | 83" (for 7'0" door), 95" (for 8'0" door) |
Material | Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings. |
Load / Frequency | For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.). Heavy Duty 600 — For high-frequency doors up to 600 lb. Rivnuts are recommended in the frame and door when the door exceeds 450 lb |
Usage | Heavy Duty |
ANSI/BHMA Standard | ANSI/BHMA A156.26-2006 Grade 1 |
Fire Rating | All SELECT hinges have been UL® tested and listed to 90-minute Fire Rating Standards without fire pins or studs—at no extra cost |
Continuous Hinge Type | Wide Throw |
Buy American Act Compliance | Meets Buy Amercian Act – Made in USA |
Related Products
-
Pemko - WT_FM-HD1 Full Mortise Wide Throw Continuous Gear Hinge, Heavy Duty
Multiple FinishesStarting at: $238.68Usage: Heavy Duty -
Markar - FM300WT Heavy Duty Full Mortise Wide Throw Stainless Steel Pin & Barrel Continuous Hinge
Starting at: $688.91Usage: Heavy Duty -
Select - SL11 HD300 Concealed Geared Continuous Hinge
Multiple FinishesStarting at: $120.04Usage: Heavy Duty -
Select - SL21 HD600 Heavy Duty Full Surface Geared Continuous Hinge
Multiple FinishesStarting at: $209.30Usage: Heavy Duty -
Select - SL11 HD600 Heavy Duty Concealed Geared Continuous Hinge
Multiple FinishesStarting at: $138.51Usage: Heavy Duty