Select SL41 LL Heavy Duty Swing Clear Geared Continuous Hinge

Usually Ships: 2-3 Business Days

1/16″ door inset, for 1-3/4″ doors.
UL listed, fire-rated
Swing clear hinge

Available Options:

Finish

Length

Clear

Quantity:

Concealed edge mount architectural grade aluminum hinges. No mortise required. For new construction or renovation/retrofit. Hinge failure is the most common cause of entrance failure. The revolutionary SELECT geared continuous hinge puts an end to costly and frustrating hinge failure problems.

Door edge protector. Requires 2-1/4″ frame face for full rotation clearance. 1-1/2″ frame face needed for mounting. 1/16″ door inset. For 1-3/4″ doors.

All SL41 LL geared continuous hinges are BHMA Grade 1 certified.

Additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors
Lifetime lubrication
Anodized after machining
Consistent templating

Brand	Select
Finishes	Clear Anodized Aluminum, Dark Bronze Anodized Aluminum
Length	83" (for 7'0" door), 85" (for 7'2" Door), 95" (for 8'0" door)
Material	Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.
Load / Frequency	For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.). Additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors. Rivnuts are recommended in the frame and door on extremely tall, extremely heavy or wide doors.
Usage	Heavy Duty
ANSI/BHMA Standard	ANSI/BHMA A156.26-2006 Grade 1
Fire Rating	All SELECT hinges have been UL® tested and listed to 90-minute Fire Rating Standards without fire pins or studs—at no extra cost
Continuous Hinge Type	Swing Clear
Buy American Act Compliance	Meets Buy Amercian Act – Made in USA