Select SL48 HD600 Heavy Duty Concealed Geared Continuous Hinge

Usually Ships: 2-3 Business Days

1/8″ door inset, for 1-3/4″ thick doors
UL listed, fire-rated
Supports weights up to 600lbs

Available Options:

Finish

Length

Clear

Quantity:

Concealed edge mount architectural grade aluminum hinges. No mortise required. For new construction or renovation/retrofit. Hinge failure is the most common cause of entrance failure. The revolutionary SELECT geared continuous hinge puts an end to costly and frustrating hinge failure problems.

1/8″ door inset
For 1-3/4″ doors
SL48 HD geared continuous hinges are BHMA Grade 1 certified
Lifetime lubrication
Anodized after machining
Consistent templating

Brand	Select
Finishes	Clear Anodized Aluminum, Dark Bronze Anodized Aluminum
Length	83" (for 7'0" door), 95" (for 8'0" door)
Material	Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.
Load / Frequency	For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.). Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door.
ANSI/BHMA Standard	ANSI/BHMA A156.26-2006 Grade 1
Fire Rating	All SELECT hinges have been UL® tested and listed to 90-minute Fire Rating Standards without fire pins or studs—at no extra cost
Continuous Hinge Type	Full Mortise (Concealed)
Usage	Heavy Duty
Buy American Act Compliance	Meets Buy Amercian Act – Made in USA