Select SL84 HD600 Heavy Duty Concealed Geared Continuous Hinge

Usually Ships: 2-3 Business Days

1/16″ door inset, for 1-3/4″ thick doors
UL listed, fire-rated
Supports weights up to 600lbs

Available Options:

Finish

Length

Clear

Quantity:

Concealed edge mount architectural grade aluminum hinges. No mortise required. For new construction or renovation/retrofit. Hinge failure is the most common cause of entrance failure. The revolutionary SELECT geared continuous hinge puts an end to costly and frustrating hinge failure problems.

Beveled frame leaf allows for weatherstripping or smoke seal
Door edge protector
For 1-3/4″ doors
SL84 HD600 geared continuous hinges are BHMA Grade 1 certified
Lifetime lubrication
Anodized after machining
Consistent templating

Brand	Select
Finishes	Clear Anodized Aluminum, Dark Bronze Anodized Aluminum
Length	83" (for 7'0" door), 85" (for 7'2" Door), 95" (for 8'0" door)
Material	Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.
Load / Frequency	For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.). Heavy Duty 600 – For high-frequency doors up to 600 lb. Rivnuts are recommended in the frame and door when the door exceeds 450 lb.
ANSI/BHMA Standard	ANSI/BHMA A156.26-2006 Grade 1
Fire Rating	All SELECT hinges have been UL® tested and listed to 90-minute Fire Rating Standards without fire pins or studs—at no extra cost
Continuous Hinge Type	Full Mortise (Concealed)
Usage	Heavy Duty
Buy American Act Compliance	Meets Buy Amercian Act – Made in USA